Rubber filter machine
Rubber filter machine
Rubber filter machine
Rubber filter machine
Rubber filter machine
Rubber filter machine
Rubber filter machine
Rubber filter machine

Rubber filter machine

The rubber filter is mainly used for the filtration of mixed rubber or plastic to remove foreign matters and impurities.

call the hotline to learn more

+86 371 55699336
+86 17329434357

The rubber filter is mainly used for the filtration of mixed rubber or plastic to remove foreign matters and impurities.

 

It is a machine that uses screw push and transport to remove the impurities in rubber or reclaimed rubber. It is mainly composed of screw, barrel, filter head and transmission device. The rubber filter head is equipped with an orifice plate and a filter screen. The orifice plate is used to support the filter screen and is a discharge port. Its aperture is 4 ~ 8mm, which is a conical hole expanding along the rubber flow direction. The ratio of length to diameter of screw is about 5.

 

Rubber filter machine


Characteristic:

It is mainly composed of machine head (configured according to user's demand), body, reducer, motor and electrical control system, heating and cooling system, etc.

 

Safety operation procedures of rubber filter:

1. Before filtration, the head and fuselage must be preheated to the specified temperature.

2. The motor load shall not exceed the specified value (160A).

3. The temperature of filter rubber should not exceed 140 ℃, especially that of chloroprene rubber should not exceed 105 ℃ during normal overflow.

4. The burnt mixed glue shall not be filtered, and the filtered mixed glue shall not have burnt particles.

5. Cold glue should not be filtered. If cold glue needs to be filtered, it must be pressed soft before filtering.

6. Do not add metal and other impurities into the filter.

7. It is strictly forbidden to plug glue into the feeder by hand or take glue out by hand during operation.


Copyright:Henan JinXin 2021