Primary rubber mixing production line
Primary rubber mixing production line
Primary rubber mixing production line
Primary rubber mixing production line
Primary rubber mixing production line
Primary rubber mixing production line
Primary rubber mixing production line
Primary rubber mixing production line

Primary rubber mixing production line

The primary rubber mixing production line is to realize the lamination and mixing of the mixed rubber with the mixer.

call the hotline to learn more

+86 371 55699336
+86 17329434357

The primary rubber mixing production line is to realize the lamination and mixing of the mixed rubber with the mixer. In the film circulation process, two swinging conveyor belts are used to swing the rubber back and forth along the axial direction of the roller, so that the rubber can be mixed evenly, and the rubber can be transported to the conveyor belt of the conveying system.

 

rubber mixing production line


Main product description:

1. Conveyor belt: high temperature resistant conveyor belt.

2. Dispensing trolley: there are two sets of trolley which can run independently. Each set of trolley is an independent belt conveyor, which can run along the axial direction according to the program control to realize the dispensing function. The belt adopts the manual deviation adjustment mode, and the axial swing adopts the frequency conversion motor drive chain to drive the trolley.

3. Belt tension device: the air cylinder tension form is adopted to ensure that the belt tension degree is the same when the belt is idling and gluing, so that the belt can work under the appropriate tension and prolong the service life of the belt.

4. Belt rectifying device: through the signal transmission to the pneumatic control rectifying device to quickly adjust the belt to avoid belt damage.

5. Rubber material clamping: it is clamped by swinging crank belt, which is used for flat belt conveying when no clamping is needed. Necessary buffer devices are set at both ends to reduce the impact caused by rotation.

6. Top belt: driven by frequency conversion motor, it is used as a conventional belt to transport the film when it rotates forward. When the film is broken, the belt reverses, forming the opposite running direction with the mixer, breaking the rubber and conveying the rubber on the belt to the next link.


Copyright:Henan JinXin 2021