Automobile heat insulation coating machine
Automobile heat insulation coating machine
Automobile heat insulation coating machine
Automobile heat insulation coating machine
Automobile heat insulation coating machine
Automobile heat insulation coating machine
Automobile heat insulation coating machine
Automobile heat insulation coating machine

Automobile heat insulation coating machine

Suitable for water-based solvent and oil-based solvent,the thickness of running substrate is 10-120um

call the hotline to learn more

+86 371 55699336
+86 17329434357

1. Suitable for water-based solvent and oil-based solvent

2. The thickness of running substrate is 10-120um

3. Coating method: Micro gravure, comma scraper, slit coating

4. Tension range 0-50kg full width

5. The running speed of the machine is less than or equal to 50m / min, and the coating speed depends on the specific process of the user

6. Coating width 1100-1600mm

7. Coating thickness 50-120um

8. The maximum temperature of the oven is 170 ℃, which can be adjusted according to the customer's conditions


Automotive insulation film coating machine

During the operation of the coating machine, there are often problems of wear of the transmission parts, such as the wear of the drying cylinder shaft head of the coating machine, and the wear of the bearing chamber of the reeling roller. The traditional repair methods include surfacing, thermal spraying, electric brush plating, etc., but they all have certain drawbacks: surfacing will cause the surface of the part to reach a high temperature, causing deformation or cracks, and in severe cases, it will also lead to the fracture of the shaft; electroplating coating It cannot be too thick, and the pollution is serious, and the application is also limited.

With the development of technology, polymer composite materials can be used to solve the above-mentioned problems. The material has good adhesion and compressive strength, which can repair the abrasion of the coating machine on site without disassembly. At the same time, because of its lack of metal retreat, it can well absorb the shock and vibration of the equipment and avoid secondary wear.


Copyright:Henan JinXin 2021